How To Install STB Emulator
Installing STB Emu is easy by going to the Google Play Store doing a quick search and clicking Install.
Links to STB Emu on Google Play Store
StbEmu (Free)
StbEmu (Pro)
After it is installed the IPTV information will need to be entered with the steps below.
How To Setup STB Emulator
A video is at the bottom of the page for a visual walk though and setup.
Below is a basic setup of STB EMU and should work with most IPTV providers.
Things needed
… IPTV Service Package:
… Portal URL: this is a link the IPTV will give you.
… MAC Address: This can be taken from another box or most all IPTV provider will give you one when asked for.
1… The first time it starts a box will come up click on Configure Application.
2… The Settings page will come up go to Profiles.
If the screen comes up like this click the top right of the screen and go to settings.
3… Go to Profile Name
4… Change the name to the IPTV Provider you are using.
5… Next go to Portal Settings
6… Click on Portal URL
7… Each IPTV service will have a unique Portal URL that needs to be entered. Enter that in here.
8… Next go to STB Configuration
9… Select STB Model
10… Select the MAG box Version to Emulate. The MAG box compatibility will also be from your IPTV provider. If in doubt select MAG 254 as it has wide compatibility.
11… Select Screen Resolution
12… Set the screen resolution to Auto unless you are sure about you TVs resolution.
13… Next Select MAC address
14… Enter your unique MAC address. This can be taken from another box or the IPTV service can give you one.
15… Click on Serial Number
16… This is optional but I like to erase the serial number so the IPTV is not tied to the box and can be used on anther device.
17… At this point click out and EXIT
18… Reopen STB EMU which may take a few minutes to load up the new settings.
At this point it should be ready to stream videos. If not, reload the portal again.
